massey

Part Number: SBG2546

Description:

Bars are priced individually, but sold in pairs only. Note when replacing bars, the bar located exactly 180 degrees should also be replaced to ensure the cylinder/ rotor remains in balance. Boronizing, is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear.

Part Number: SBG2540

Description:

Bars are priced individually, but sold in pairs only. Note when replacing bars, the bar located exactly 180 degrees should also be replaced to ensure the cylinder/ rotor remains in balance.

Part Number: SBG2536

Description:

Bars are priced individually, but sold in pairs only. Note when replacing bars, the bar located exactly 180 degrees should also be replaced to ensure the cylinder/ rotor remains in balance. Inner bar. Boronizing, is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear.

Part Number: SBG2420

Description:

Bars are priced individually, but sold in pairs only. Note when replacing bars, the bar located exactly 180 degrees should also be replaced to ensure the cylinder/ rotor remains in balance.

Part Number: SBG2530

Description:

Bars are priced individually, but sold in pairs only. Note when replacing bars, the bar located exactly 180 degrees should also be replaced to ensure the cylinder/ rotor remains in balance. Inner bar.

Part Number: SBG2550

Description:

Bars are priced individually, but sold in pairs only. Note when replacing bars, the bar located exactly 180 degrees should also be replaced to ensure the cylinder/ rotor remains in balance. Inner bar.

Part Number: SBM0090

Description:

Hi-inertia, includes 1/2 hardware

Part Number: SBM0120

Description:

Hi-inertia, 1/2 hardware

Part Number: SBFP0010

Description:

For all SBW conventional concaves, specify 1" or 2" wire spacing

Part Number: SBM0380

Description:

Impeller knife for Massey Ferguson and Gleaner rotors. Directly bolts on to rotor.

Part Number: SBM0900BB

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBM0900E

Description:

The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear.

Part Number: SBM0902B

Description:

Concave consists of main frame and 3 boron max thresh inserts. The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBM0905

Description:

Concave consists of main frame and 3 clover boron max thresh inserts. The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear.

Part Number: SBM0902

Description:

Concave consists of main frame and 3 regular max thresh inserts. Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert.

Part Number: SBM0904

Description:

Concave consists of main frame and 3 round bar inserts. The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBM0903

Description:

Concave consists of main frame and 3 standard thresh inserts. The Standard Thresh insert provides threshing, but it is less aggressive than our helical bar style. Standard Thresh Insert is designed to balance threshing and separating and is typically used in the middle of a concave set to transition materials or where a less aggressive thresh is desired. Individually replaceable.

Part Number: SBM0900

Description:

Empty box style concave frame only.

Part Number: SBM0900B

Description:

Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert.

Part Number: SBM0900D

Description:

The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBM0540BB

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBM0544

Description:

Concave consists of main frame and 6 round bar inserts. The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBM0542B

Description:

Concave consists of main frame and 6 boron max thresh inserts. The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBM0542

Description:

Concave consists of main frame and 6 regular max threst inserts. Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert.

Part Number: SBM0543

Description:

Concave consists of main frame and 6 standard thresh inserts. The Standard Thresh insert provides threshing, but it is less aggressive than our helical bar style. Standard Thresh Insert is designed to balance threshing and separating and is typically used in the middle of a concave set to transition materials or where a less aggressive thresh is desired. Individually replaceable.

Part Number: SBM0540

Description:

Empty box style concave frame only.

Part Number: SBM0540B

Description:

Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert.

Part Number: SBM0540D

Description:

The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBM0540C

Description:

The Standard Thresh insert provides threshing, but it is less aggressive than our helical bar style. Standard Thresh Insert is designed to balance threshing and separating and is typically used in the middle of a concave set to transition materials or where a less aggressive thresh is desired. Individually replaceable.

Part Number: SBM0950

Description:

Stay sharp design, with tungsten carbide lasering - lasered strips wear at a slower rate than the blade steel causing a natural serration and the blade to sharpen as it wears. Improved residue management (optimized size and distribution). Longer maintained rotor balance due to the additional tungsten carbide deposition in the corners of the blade.