new holland

Part Number: SBN0424

Description:

The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBN0428LGL

Description:

This setup contains 2 Regular Max Thresh, 1 Round Bar, and 1 Rod Separator Module to customize for your easy threshing needs. Three modules are installed at a time, allowing mixing and matching. Left hand configuration.

Part Number: SBN0420

Description:

Replacement main tri-frame for the CR machines with the 17 rotor. It fits both left and right sides. Each frame receives three modules consisting of a subframe with 3 inserts, and an extension grate (not included). When installing, this frame should be put in empty for increased visibility and reduced weight (54lbs). Once the tri-frame is installed, the modules can be set on the dowels and then bolted into place.

Part Number: SBN0421EL

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBN0421ER

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Right hand configuration.

Part Number: SBN0421CLB

Description:

The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear. Right hand configuration.

Part Number: SBN0421CRB

Description:

The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear. Right hand configuration.

Part Number: SBN0428LGR

Description:

This setup contains 2 Regular Max Thresh, 1 Round Bar, and 1 Rod Separator Module to customize for your easy threshing needs. Three modules are installed at a time, allowing mixing and matching. Right hand configuration.

Part Number: SBN0428SGL

Description:

This setup contains 2 Regular Max Thresh and 2 Round Bar Modules to customize for your threshing needs. Three modules are installed at a time, allowing mixing and matching. Left hand configuration.

Part Number: SBN0428SGR

Description:

This setup contains 2 Regular Max Thresh and 2 Round Bar Modules to customize for your threshing needs. Three modules are installed at a time, allowing mixing and matching. Left hand configuration.

Part Number: SBN0421BL

Description:

Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Left hand configuration.

Part Number: SBN0421BR

Description:

Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Right hand configuration.

Part Number: SBN0421C

Description:

The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBN0323R

Description:

Boron max thresh module is normally used in the front area of the concave. The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBN0323L

Description:

Boron max thresh module is normally used in the front area of the concave. The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBN0326BL

Description:

Hard thresh setup contains a main tri-frame with 4 modules (1 Boron Max Thresh insert module, 1- Regular max thresh insert module, 2-Round bar modules) for customizing the concave setup for crop variations and conditions. Left-hand configuration.

Part Number: SBN0326BR

Description:

Hard thresh set up contains main tri-frame with 4 modules (1-Boron Max Thresh insert module, 1- Regular max thresh insert module, 2-Round bar modules) for customizing the concave set up for crop variations and conditions. Right hand configuration.

Part Number: SBN0323CLL

Description:

Clover boron max thresh module is normally used in the front area of the concave. The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen corrosion resistance and abrasive wear. Left-hand configuration.

Part Number: SBN0331L

Description:

The extension grates fit into the main concave tri-frames. Extension grates have the same insert styles as the main concaves. Left hand configuration.

Part Number: SBN0331R

Description:

The extension grates fit into the main concave tri-frames. Extension grates have the same insert styles as the main concaves. Right hand configuration.

Part Number: SBN0330ER

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the extension grate, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Right hand configuration.

Part Number: SBN0330EL

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the extension grate, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBN0330

Description:

Replaceable heavy-duty extension grate frame. Used with extension grate inserts (not included). Can be used both left and right.

Part Number: SBN0330BL

Description:

Extension Grate Regular Max thresh insert is normally used in the front area of the extension grates. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Left hand configuration.

Part Number: SBN0330BR

Description:

Extension Grate Regular Max thresh insert is normally used in the front area of the extension grates. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Right hand configuration.

Part Number: SBN0330C

Description:

The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBN0322L

Description:

Regular Max thresh module is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Left hand configuration

Part Number: SBN0322R

Description:

Regular Max thresh module is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Right hand configuration.

Part Number: SBN0327L

Description:

The rod separator is a very passive module; its main function is to separate with as little damage as possible. It would be used in edible bean crops to reduce dockage due to splits or cracks or with dry canola conditions moving the crop residue with as little damage as possible. This insert can be used for crops such as corn or sunflower. Left hand configuration.

Part Number: SBN0327R

Description:

The rod separator is a very passive module; its main function is to separate with as little damage as possible. It would be used in edible bean crops to reduce dockage due to splits or cracks or with dry canola conditions moving the crop residue with as little damage as possible. This insert can be used for crops such as corn or sunflower. Right hand configuration.