new holland

Part Number: SBN0324

Description:

The round bar module is normally found in the middle or rear of the concave. The round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBN0321EL

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Left hand configuration.

Part Number: SBN0321ER

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear. Right hand configuration.

Part Number: SBN0321FL

Description:

The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear. Left hand configuration

Part Number: SBN0321FR

Description:

The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear. Right hand configuration.

Part Number: SBN0329MML

Description:

This setup contains 2 Regular Max Thresh, 1 Round Bar, and 1 Rod Separator Module to customize for your easy threshing needs. Three modules are installed at a time, allowing mixing and matching. Left hand configuration.

Part Number: SBN0329MMR

Description:

This setup contains 2 Regular Max Thresh, 1 Round Bar, and 1 Rod Separator Module to customize for your easy threshing needs. Three modules are installed at a time, allowing mixing and matching. Right hand configuration.

Part Number: SBN0328SGL

Description:

This setup contains 2 Regular Max Thresh and 2 Round Bar Modules to customize for your threshing needs. Three modules are installed at a time, allowing mixing and matching. Left hand configuration.

Part Number: SBN0328SGR

Description:

This setup contains 2 Regular Max Thresh and 2 Round Bar Modules to customize for your threshing needs. Three modules are installed at a time, allowing mixing and matching. Left hand configuration.

Part Number: SBN0321

Description:

Subframe for the module used to hold the inserts, which when combined, are housed in the main frame (SBN0320)

Part Number: SBN0321BL

Description:

Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Left hand configuration.

Part Number: SBN0321BR

Description:

Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Right hand configuration.

Part Number: SBN0321C

Description:

The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBN0323CLR

Description:

Clover boron max thresh module is normally used in the front area of the concave.The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen corrosion resistance and abrasive wear. Right-hand configuration.

Part Number: SBN0428BSGL

Description:

Hard thresh setup contains a main tri-frame with 4 modules (1 Boron Max Thresh insert module, 1- Regular max thresh insert module, 2-Round bar modules) for customizing the concave setup for crop variations and conditions. Left-hand configuration.

Part Number: SBN0428BSGR

Description:

Hard thresh set up contains main tri-frame with 4 modules (1-Boron Max Thresh insert module, 1- Regular max thresh insert module, 2-Round bar modules) for customizing the concave set up for crop variations and conditions. Right hand configuration.

Part Number: SBN0320

Description:

Replacement main tri-frame for the CR machines with the 22 rotor. It fits both left and right sides. Each frame receives three modules consisting of a subframe with 3 inserts, and an extension grate (not included). When installing, this frame should be put in empty for increased visibility and reduced weight (65lbs). Once the tri-frame is installed, the modules can be set on the dowels and then bolted into place.

Part Number: SBN0270

Description:

Generation 2 Cylinders are fully enclosed, eliminating trash build-up. They have a staggered bar design, allowing a more even flow of material and more even threshing as material passes over the concave. The evenly distributed material also reduces the impact and wear on the concave. They are more heavy-duty, allowing inertia to assist in rotation, reducing fuel consumption.

Part Number: SBN0270N

Description:

Generation 2 Cylinders are fully enclosed, eliminating trash build-up. They have a staggered bar design, allowing a more even flow of material and more even threshing as material passes over the concave. The evenly distributed material also reduces the impact and wear on the concave. They are more heavy-duty, allowing inertia to assist in rotation, reducing fuel consumption.

Part Number: SBN0276

Description:

Generation 2 Cylinders are fully enclosed, eliminating trash build-up. They have a staggered bar design, allowing a more even flow of material and more even threshing as material passes over the concave. The evenly distributed material also reduces the impact and wear on the concave. They are more heavy-duty, allowing inertia to assist in rotation, reducing fuel consumption. Boronizing, is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear.

Part Number: SBN0276N

Description:

Generation 2 Cylinders are fully enclosed, eliminating trash build-up. They have a staggered bar design, allowing a more even flow of material and more even threshing as material passes over the concave. The evenly distributed material also reduces the impact and wear on the concave. They are more heavy-duty, allowing inertia to assist in rotation, reducing fuel consumption. Boronizing, is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear.

Part Number: SBFP0010

Description:

For all SBW conventional concaves, specify 1" or 2" wire spacing

Part Number: SBN0900

Description:

Stay sharp design, with tungsten carbide lasering - lasered strips wear at a slower rate than the blade steel causing a natural serration and the blade to sharpen as it wears. Improved residue management (optimized size and distribution). Longer maintained rotor balance due to the additional tungsten carbide deposition in the corners of the blade.

Part Number: SBN0252

Description:

Kit of 16 replaceable wear edge for the concaves SBN0250 and SBN0250ELEV

Part Number: SBN0251

Description:

Individual replaceable wear edge for the concaves SBN0250 and SBN0250ELEV

Part Number: SBSH0020

Description:

All makes. 100/pkg